ABB ACS580 series AC Inverter for 11kW (15HP) 230V 3 Ph motor to 46.2A at high overload or 15kW (25HP) to 59.4A when Fan/Pump rated. Operates in VxF or Sensorless Vector control and converts fixed frequency Three Phase 400V input to variable frequency 400V to control the speed of a standard AC induction motor.
Size R3: 203mm Wide x 229mm Deep x 490mm High (glandbox is integrated). IP21.
Weight: 11.8kg.
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-500Hz.
Options Included:
- Cable conduit entry (UK version), Cable conduit plates for ACx580 R1-R4 (H358)
- ACS-AP-S, ACS-AP-S Assistant Control Panel (J400)
Supplied with Operator Keypad (Assistant Control Panel)
2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for RS-485/Modbus RTU communications, terminals for dual channel SIL3 safe torque off (STO), 24V AC/DC input to power the control unit when the main supply is disconnected.
Input Current: [as output current]
Input Voltage: 200-240V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 + A1:2012 Category C2 (Industrial or restricted Domestic)
Cubicle mount.
Rated 40°C Ambient.
Ventilation space above: 53mm, below: 200mm, at sides: 150mm, in front: [Not Specified]
Heat Loss at max output: 775W
Mounting via 4 x 7.2mm diameter slotted holes at rear on 160mm x 473mm centres.
New Part Number is ACS580-01-060A-2+H358 +J400 or 3AXD50000417421.
Download the ABB ACS580-01 Manual and Quick Start Guide from the links below:-