ABB ACS355 AC Frequency Inverter for 11kW (15HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 31A. Simple to set-up with AC three phase or DC input for a standard AC Induction motor or permanent magnet synchronous motor.
Drive Includes N827 Option Solar Pump Software
No Keypad included.
Dimensions: Size R4 260mm Wide x 169mm Deep x 181mm high (244mm high including fastenings and clamp plate).
Enclosure Rating: IP20.
Weight: 5.1kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 16 ohms minimum, 29 ohms Maximum external resistor (not supplied). See the items below or Use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: 52A.
AC Input Voltage: 380-480V Three Phase at 50/60Hz ±5%.
or
DC Input Voltage: 250-800V
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Mounting: Cubicle mount onto 35mm DIN rail or via 4 x 5mm diameter holes at rear on 234mm x 191mm centres (no side mounting with this frame size).
Ambient: Rated at 40°C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm (drives can be mounted side by side)
Heat Loss at max output: 407.8W.
Part number: ACS355-03E-31A0-4+N827 (3AUA0000157197+N827).
Download the ABB ACS355 Manual from the link below:-