ABB ACS355 AC Frequency Inverter for 11kW (15HP) 400V 3 Phase motor in VxF or Sensorless Vector control to 23.1A. Simple to set-up with 400V three phase input for a standard AC Induction motor or permanent magnet synchronous motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
No Keypad included.
Size R3: 169mm Wide x 169mm Deep x 169mm high (236mm high including fastenings and clamp plate). IP20.
Weight: 2.9kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range - 0-600Hz.
Braking: Full load for 10 seconds every 120 seconds to 30 Ohm minimum, 40 Ohm Maximum external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals: Include charge limit components in-circuit for DC supply, or common bus energy saving applications.
'Safe Torque Off' (STO) function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: 30.9A when directly connected to the supply, or 17.5A when a 1.5mH AC input choke is included.
Input Voltage: 380-480V Three Phase at 50/60Hz ±5%.
EMC Filters: IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 301.4W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 148mm x 191mm centres
(no side mounting with this frame size).
Full part number is - ACS355-03E-23A1-4 (ACS35503E-23A1-4) (3AUA0000058192) and is a direct replacement for the equivalent ACS350.
Download the ABB ACS355 Manual from the link below:-