ABB ACS310 AC Frequency Inverter for 2.2kW (3HP) 400V 3 Phase Centrifugal Fan or Pump in VxF control to 5.6A.
** New range of products now available as a replacement for the ACS310, plesase see products listed below **
Supplied with ACS-CP-C Basic Control Panel (keypad). Also available without an operator keypad - see linked products below. Note that the stock quantity shown applies with or without a keypad.
Size R1 - 70mm Wide x 162mm Deep x 170mm high (239mm high including fastenings and clamp plate). IP20.
Weight: 1.3kg.
Overload - 110% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range - 0-500Hz.
Braking - None.
2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set, RS485 Modbus-RTU,
Programmable from a PC via 'DriveWindow Light' or using the ABB FlashDrop tool.
Input Current - 9.6A, or 4.8A when supplied via a minimum 4.6mH AC Input choke (see the products linked below) to reduce the metered kVA from 6.6kVA per drive, to 3.3kVA.
Input Voltage - 380-480V Three Phase ±10% at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial) for shielded cable lengths up to 30m.
Wall mount in clean environment or cubicle mount.
Rated at 50°C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 90W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 50mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number (without ACP-CP-C) - ACS310-03E-06A2-4 (3AUA0000039630).
Download the ABB ACS310 Manual from the links below:-