Yaskawa GA500 Series AC Inverter for 7.5kW (10HP) 230V 3ph motor to 33A at high overload or 11kW (15HP) 42A when Fan/Pump rated. Operates in VxF or Sensorless Vector and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V to control a standard AC induction, permanent magnet or synchronous reluctance motor.
Dimensions: 140mm Wide x 140mm Deep x 260mm High. IP20.
Weight: 3.6kg.
Output Current (High Overload: 33A.
Output Current (Low Overload): 42A.
Overload: 150% x 60 seconds. High Overload. (Once every 10 minutes)
Overload: 110% x 60 seconds. Fan/Pump Rated. (Once every 10 minutes)
Speed Control Range: 0-590Hz.
Braking (DBr): Built-in braking transistor for 100% Torque for 10 seconds every 100 seconds (10% duty cycle). A 32 Ohm minimum external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required.
Includes removable Operator Keypad, 2 Analogue Inputs, 7 Digital Inputs, 1 Pulse Input, 1 Analogue Outputs, 1 Pulse Output, 2 Digital Outputs, 1 Relay Output, USB mini-B port for PC connection.
Serial Communications: Terminals for MEMOBUS/Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL3 (EN61800-5-2)
24V DC input to power the control unit when the main supply is disconnected. (24V, 700mA nominal)
Input Current: 35A at High Overload, 35A when Fan/Pump rated.
Input Voltage: 200-240V Single Phase -15% +10% at 50-60Hz ±5%.
EMC Filter: None. (External Filters available, please see linked products below)
Cubicle mount.
Rated at 40°C ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 30mm.
Heat Loss at High Overload: 255 total at max output.
Heat Loss at Fan/Pump Rating: 391W total at max output.
Manufacturer part number is CIPR-GA50C2042ABAA.