Yaskawa GA500 Series AC Inverter for 5.5kW (7HP) 230V 3ph motor to 25A at high overload or 7.5kW (10HP) to 30A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 200V input to variable frequency Three Phase 200V to control a standard AC induction, permanent magnet or synchronous reluctance motor.
140mm Wide x 196mm Deep x 260mm High. IP20.
Weight: 3.9kg.
Overload: 150% x 60 seconds. High Overload.
Overload: 110% x 60 seconds. Fan/Pump Rated.
Speed Control Range: 0-590Hz.Braking (DBr): Built-in braking transistor for 100% Torque for 10 seconds every 100 seconds (10% duty cycle). 780W 40 Ohms recommended for 40% and 10 ohms for ED
A 9.6 Ohm minimum external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required.
Includes removable Operator Keypad, 2 Analogue Inputs, 7 Digital Inputs, 1 Pulse Input, 1 Analogue Outputs, 1 Pulse Output, 2 Digital Outputs, 1 Relay Output, USB mini-B port for PC connection.
Serial Communications: Terminals for MEMOBUS/Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL3 (EN61800-5-2)
24V DC input to power the control unit when the main supply is disconnected. (24V, 700mA nominal)
Input Current: 24A at High Overload, 37A when Fan/Pump rated.
Input Voltage: 200-240V Three Phase -15% +10% at 50-60Hz ±5%.
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Disabled by default, can be enabled via screw.
Cubicle mount.
Rated 50°C ambient.
Ventilation space in front: [not specified], above: 120mm, below: 120mm, at sides: 30mm.
Mounting via 4 x M5 bolts (not supplied) at rear on 122mm x 248mm centres.
Manufacturer part number is CIPR-GA50C2030EBA (GA50C2030EBA)
Download the Yaskawa GA500 Technical Manual and Initial Steps (Quick Start) Guide from the links below:-