Vacon 20 series AC Inverter for 0.75kW (1HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 3.7A. Simple to set-up single phase 230V input to three phase 230V for a standard AC Induction motor.
Size MI2 - 90mm Wide x 101.5mm Deep x 195mm High. IP20.
Weight: 0.7kg.
150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range - 0-320Hz.
Braking - None.
Features – Integral Keypad, 2 x Analogue Input, 1 x Analogue Output, 6 x Digital Inputs, 2 x Relay Contact set, 1 Digital Output (open collector), RS485
Parameter setting from a PC via 'Vacon Live'.
Input Current - 8.3A.
Input Voltage - 208-240V -15% +10% Single Phase at 50/60Hz ±10%.
EMC Filters to IEC/EN 61800-3 1st and 2nd Environment C2 (Industrial and Domestic)
Cubicle mount.
Rated at 40°C Ambient.
Ventilation space above - 100mm.
Ventilation space below - 50mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - Not specified.
Mounting via 3 x 5.5mm diameter holes at rear on 62.5mm x 183mm centres.
Full part number is - VACON0020-1L-0004-2+EMC2+QPES.
Download the Vacon 20 Manual and Quick Guide from the link below:-