Teco E510 Series AC Inverter for 1.5kW (2HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 7.5A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Size 2: 127.8mm Wide x 147.8mm Deep x 197.5mm High. IP20
Weight: 2.5kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking (DBr): Minimum 100 Ohm external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 16A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz
EMC Filters (EMC): IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M4 screws on 118mm x 177.6mm centres.
Manufacturer part number is E510-202-H1F.
Download the Teco E510 Manual and Quick Start Guide from the links below:-