Siemens V20 series AC Frequency Inverter for 3kW (4HP) 230V three phase motor in VxF control to 13.6A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Size FSC: 184mm Wide x 169mm Deep x 182mm High IP20.
Cooling: Single fan.
Overload: 150% x 60 seconds followed by 94.5% for 240 seconds (High Overload)
Speed Control Range: 0-550Hz
Braking: via optional Dynamic braking module - see linked products below.
Integrated Keypad, 2 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, 1 Expansion Port, DC Bus Terminals, Terminals for Modbus RTU or USS over RS485 Communications.
Input Current: 32A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C2 (Industrial or restricted Domestic).
Rated 40°C Ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 15mm or 0mm between V20 drives.
Heat Loss at max output: 177W
Mounting via 4 holes at rear for M5 screws on 170mm x 140mm centres.
Manufacturer part number is 6SL3210-5BB23-0AV0. Sometimes specified as 6SL32105BB230AV0.
Download the Siemens V20 Manual and Quick Start Guide from the links below:-