Santerno Sinus M - 11kW 230V 1ph to 3ph - AC Inverter Drive Speed Controller

Santerno - AC Frequency Inverter for a 11kW (15HP) 230V 3 Ph motor in Simple VxF or Sensorless Flux Vector control to 46A. Converts single phase 230V input (or three phase 230V) to variable frequency three phase 230V for a standard AC Induction motor.

Simple set-up from 'Quick-Start' menu for control up to twice the motors nominal speed.
235mm Wide x 189.5mm Deep x 320mm High - IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/400Hz.
Braking - 20% duty into minimum 33 Ohm external resistor.
EMC - compliant to EN 61800-3 2nd edition 2nd environment C3 Category (Industrial).

2 x Analogue Inputs (one is Current input), 8 Digital Inputs, 1 Analogue output, 2 Digital outputs (one relay).
Input Current: - xxA via 80A circuit breaker or 100A Fuse.
Input Voltage - 380V to 480V Three Phase +10%, -15% at 50/60Hz (±5%).

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Mounting via 4 x 7mm holes at rear on 219mm x 304mm.

Full part number is - Sinus M 0017 2S/T BA2K2

Download the Santerno Sinus Inverter Manual from the link below...