Santerno Sinus M - 1.5kW & 1.8kW 230V 1/3ph to 3ph - AC Inverter Drive Speed Controller

Santerno - AC Frequency Inverter for a 1.5kW or 1.8kW (2HP or 2.5HP) 230V 3 Ph motor in Simple VxF or Sensorless Flux Vector control to 8A. Converts single phase 230V input (or three phase 230V) to three phase 230V for a standard AC Induction motor.

Simple set-up from 'Quick-Start' menu for control up to twice the motors nominal speed.
100mm Wide x 130mm Deep x 128mm High - IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/400Hz.
Braking - 20% duty into minimum 56 Ohm external resistor.
EMC - compliant to EN 61800-3 2nd edition 2nd environment C3 Category (Industrial).

2 x Analogue Inputs (one is Current input), 8 Digital Inputs, 1 Analogue output, 2 Digital outputs (one relay).
Input Current: - xxA via 16A circuit breaker or 15A Fuse.
Input Voltage - 200V to 230V Single or Three Phase +10% -15% at 50/60Hz (±5%) (reduced kW rating at 200V).

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 50mm.
Mounting with screw fixing (3 x M4).

Full part number is - Sinus M 0003 2S/T BA2K2

Download the Santerno Sinus Inverter Manual from the link below...