Control Techniques Commander SK Series AC Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 9.6A. Converts fixed frequency single or three phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
Size C: 100mm Wide x 173mm Deep x 258mm High. IP20
Weight: 2.1kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-1500Hz
Braking: Minimum 28 Ohm, Maximum 3.4kW external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 1 Analogue/Digital Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact set, RJ45 port for Modbus.
Input Current: 23.2A (Single Phase), 11.9A (Three Phase)
Input Voltage: 200-240V Single or Three Phase ±10% at 50-60Hz ±5%
EMC Filters: EN 61800-3:2004 Second Environment (Industrial). Can be disabled using pull-tab.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 10mm (50mm between drives).
Heat Loss at max output: 93W (at rated ambient temperature and default switching frequency).
Mounting via 4 x holes at rear for M4 screws on 70.7mm x 240mm centres.
Manufacturer part number is SKCD200220. Replaces Commander SE.
Download the Commander SK Manual and Startup Guide from the links below:-