IMO SD1 Series AC Inverter for 0.4kW 230V 3ph motor to 2.5A at high overload or when Fan/Pump rated. Operates in VxF or Sensorless Vector and converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V to control a standard AC induction, motor.
Size 1: 80mm Wide x 124mm Deep x 160mm High. IP20.
Weight: 0.9kg.
Overload: 150% x 60 seconds.(Once every 10 minutes)
Speed Control Range: 0-590Hz.
Braking (DBr): Built-in braking transistor. A 42 Ohm (minimum), 361 Ohm (100% braking torque) external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required, please see linked item below.
Includes fixed Operator Keypad with Potentiometer
2 Analogue Inputs, 4 Digital Inputs, 1 Pulse Input, 1 Analogue Output, 1 Digital Output, 1 Relay Output.
Serial Communications: Terminals for Modbus RS485 (Wired)
Safe Torque Off (STO) function to SIL2 (EN61800-5-2)
Input Current: 6.5A.
Input Voltage: 220-240V Single Phase -15% +10% at 50-60Hz
EMC Filter: Not Fitted (Unfiltered), external option please see linked product below.
Cubicle mount.
Rated at 40°C ambient.
Ventilation Space: In front: [not specified], above: 100mm, below: 100mm, at sides: 30mm.
Mounting via DIN rail or 4 x 5mm fixings at rear on 150mm x 60mm centres.
Heat Loss: XXXW
Manufacturer part number is SD1-2.5A-21
Replaces: XKL-040-21