Nord SK530E Series AC Inverter for 0.75kW (1HP) 230V 1/3 Ph motor in VxF or Sensorless Vector control to 2.2A. Converts fixed frequency three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Operator keypad not included - see linked products below.Home
Size 1: 74mm Wide x 153mm Deep x 186mm High (excluding mounting brackets). IP20
Weight: 1.6kg.
Overload: 150% x 60 seconds, 200% x 3.5 seconds
Speed Control Range: 0-400Hz
Braking: Minimum 190 Ohm external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact sets, Safe Torque Off (STO / SS1), Incremental Encoder Input Terminals, Integrated “POSICON” positioning control, RJ12 port for RS232 or RS485 Communications, 2 RJ45 ports for CANbus/CANopen Communications, DC Bus Terminals.
Input Current: 4.8/3.1A
Input Voltage: 380-480V Three Phase +10% -20% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Class B Category C1 (Industrial and Domestic). Leakage can be reduced or filters disabled via jumpers if required.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 38W (approx.)
Mounting via 2 x 5.5mm slotted holes on supplied brackets at rear on 220mm centres. Optional DIN rail mount kit (not supplied).
Manufacturer part number is SK 530E-323-230-A. Sometimes specified as Nordac 275610037. Part of the SK530E family.
Download the Nord SK 500E Manual from the link below:-