Mitsubishi Automation FR-E720-3.7KSC AC Frequency Inverter for a 3.7kW (5HP) 220V 3 Ph motor in VxF or Vector control to 17.5A. Simple to set-up for speed control of a standard three phase AC Induction motor.
Size D: 170mm Wide x 149mm Deep x 128mm high in IP20 case.
Weight is 1.7kg
Overload - 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range - 0/400Hz.
Braking - xx% rated to xx Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features - Front Mounted Potentiometer, 2 x Analogue Inputs, 6 Digital Inputs, 1 Analogue outputs, 1 Relay Contact sets and 2 digital outputs.
Serial Communications via Modbus RTU
Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (FR-PU07+FR-CB201).
EMC Filters - not included.
STO: Internally fitted
Input power supply capacity - xxkVA.
Input Voltage - 200/208V/220V/230V/240V three phase +-10% at 50/60Hz.
Cubicle or enclosure mounting.
Rated at 50C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm up to 40C, or 50mm above 40C.
Heat Loss at max output - xxxW.
Mounting onto rear screw fixings through xmm holes at xxxmm x xxxmm.
Full part number is - FR-E720-3.7KSC (236471) (FRE7203.7KSC)