Lenze i550 Series Power Module for 0.25kW (0.33HP) 230V 3 Ph motor to 1.7A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor. Operates in standard VxF or Sensorless Vector Control when fitted with a i550 Control module
Output rating to 1.7A
Overload: 150% x 60 seconds; 200% x 3 seconds.
Size A: 60mm Wide x 130mm Deep x 214mm High. IP20.
Weight: 0.8kg.
Speed Control Range: 0-599Hz
Braking: Internal Brake Switch fitted for use with External Brake Resistor (not supplied)
Braking Switch Limits: Min Resistance: 180 Ohms, Max Brake Current: 2.2 A. See Linked Products below for resistor or use the ‘Which Resistor’ button on this page.
Input Choke: Optional; Input Current shown without Line Reactor
Input Current: 4A
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C2 (Industrial). Filter can be disconnected (Remove IT Screws)
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 50mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 15W.
Mounting via 2 x 5mm diameter holes at rear on 165mm centres (Not DIN Mountable).
Power Module only; see below for Control Units for complete AC Inverter..
Part Number: i5DAE125B10V10000S (Power Module only)
Download the Lenze i550 Manuals from the links below:-