Invertek Optidrive E3 IP66 series AC Inverter for 0.37kW (0.5HP) 230V three phase motor in VxF or sensorless vector control to 2.3A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a IE2, IE3 or IE4 standard AC Induction Motor, Permanent Magnet motor, Brushless DC Motor or Synchronous Reluctance Motor.
SW (Switched): includes integrated Potentiometer for speed control, Fwd/Stop/Rev and Enable switches.
Size 1: 161mm Wide x 179mm Deep x 232mm High. IP66.
Weight: 3.1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: None.
Integrated operator keypad with LED display, Power on/off switch, Speed control potentiometer and Forward/Reverse switch
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 3.7A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Filter: None (Unfiltered).
Wall or cubicle mount.
Rated 50° Ambient (non enclosed).
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x 8mm holes at rear on 148.5mm x 189mm centres.
Manufacturer part number is ODE-3-120023-101Y. Replaces Optidrive E2 of equivalent rating.
Made in the UK.
Download the Invertek Optidrive E3 Manual from the link below:-