Invertek Optidrive E2 IP66 series AC Inverter for 4kW (5HP) 230V three phase motor in VxF control to 16A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a standard AC Induction Motor.
SW (Switched): includes integrated Potentiometer for speed control, Fwd/Stop/Rev and Enable switches.
Size 3: 211mm Wide x 245mm Deep x 310mm High. IP66 (Nema 4X) dust tight and resistant to water spray - indoor use only. This rating is not UL approved.
Weight: 7.6kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: To 50 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Brake Resistor Calculator' link at the bottom of this page.
Integrated operator keypad with 6-digit LED display, 2 Analogue/Digital Inputs, 2 Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU communications over RS485 or PC Connection to OptiTools Studio software.
Input Current: 30.5A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters.
Wall mount.
Rated 40° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x holes for M4 bolts at rear on 197.5mm x 251.5mm centres.
Manufacturer part number is ODE-2-32040-1K04Y. Equivalent to HP model number ODE-2-32050-1H04Y.
Made in the UK.
Download the Invertek Optidrive E2 Manual from the link below:-