Invertek Optidrive E3 IP66 0.75kW AC Inverter Drive for Single Phase 230V motor

Invertek Optidrive E3 IP66 series AC Inverter for 0.75kW (1HP) 230V single phase motor in VxF or sensorless vector control to 7A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a Single Phase Cap Run (permanent-split capacitor) or shaded pole motor. Not suitable for use with high starting torque motors shch as Cap Start (cap cap)

Size 1:  161mm Wide x 179mm Deep x 232mm High. IP66.
Weight: 3.1kg.

Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-500Hz.
Braking: None.

Integrated operator keypad with LED display, Power on/off switch, Speed Control Potentiometer, Forward/Reverse Swiitch 
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU or CANopen communications over RS485.
Input Current: 9.3A
Input Voltage: 200-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance: EN61800-3 Category C1 (Industrial and Domestic) - cannot disable filter.

Wall or Cubicle mount.
Rated 50° Ambient (non enclosed).
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x 8mm holes at rear on 148.5mm x 162mm centres.

Manufacturer part number is ODE-3-120070-1F1Y-01. Replaces Optidrive E2 of equivalent rating.
Made in the UK.

Download the Invertek Optidrive E3 Manual from the link below:-