Invertek Optidrive E3 IP20 series AC Inverter for 0.75kW (1HP) 230V single phase motor in VxF control to 7A. Converts fixed frequency single phase 230V input to variable frequency 230V to control the speed of a Single Phase Cap Run (permanent-split capacitor), or shaded pole motor. Not suitable for use with high starting torque motors such as Cap Start (cap cap).
Dimensions: Size 1, 82mm Wide x 123mm Deep x 173mm High.
Enclosure Rating: IP20.
Weight: 1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-120Hz.
Braking: None.
Features: Integrated operator keypad with 6-digit LED display, 1 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue/Digital Output, 1 NO Relay.
Input Current: 9.3A
Input Voltage: 200V-240V Single Phase ±10% (max 240V) at 50-60Hz ±5%
EMC Compliance: IEC EN61800-3:2004 Category C1 (Industrial and Domestic). Can be disabled via screw if required
Mounting: Cubicle mount.
Ambient Temperature: Rated at 50° C.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 50mm
Ventilation space at sides: 50mm
Mounting: via 35mm DIN rail or 4 x holes for M4 bolts at rear on 50mm x 162mm centres.
Manufacturers part number: ODE-3-120070-1F12-01. (Replaces ODE-2-12075-1KB12-01)
Made in the UK.
Download the Invertek Optidrive E3 Single Phase Output Manual from the link below:-