IMO iDrive2 Series AC Inverter for 0.4kW (0.5HP) 230V 3 phase motor to 2.5A. Operates in VxF control and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Dimensions: Size 1A 85mm Wide x 134.2mm Deep x 145.5mm High.
Enclosure Rating: IP20.
Weight: 1.1kg.
Overload: 150% x 60 seconds, 180% x 10 seconds, 200% x 1 second.
Speed Control Range: 0-400Hz
Braking: 100% Duty to minimum 42 Ohm, maximum 361 Ohm external resistor (not supplied), see the linked products below or use the 'Which Resistor?' button on this page.
Features: Removable Keypad, 1 Analogue Input, 4 Digital Inputs, 1 Digital Input/Output, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, Terminals for Modbus RS485 Communications.
Input Current: 6.5A
Input Voltage: 220V-240V Single Phase +10% -15% at 50-60Hz ±5%.
EMC Compliance: No integrated EMC filters. External C3 (Industrial) or C3 (restricted Domestic) filters are available, see linked products below.
Mounting: Cubicle mount via 2 x 5mm holes at rear on 74mm x 131.5mm centres.
Ambient: Rated 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 30mm.
Heat Loss: [not specified]
Part Number: XKL-040-21.
Download the IMO iDrive2 Manual from the links below:-