IMO Jaguar VXT Series AC Frequency Inverter for 1.5kW (2HP) 230V 3 Ph motor to 8A. Operates in VxF, Sensorless Flux Vector or full Closed-loop Flux Vector (with optional Encoder feedback card) control for a standard AC Induction motor
Size 2 - 110mm Wide x 153mm Deep x 130mm High. IP20
Weight: 1.6kg.
Output Current: 8A
Overload: 150% for 60 seconds, 200% for 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking (DBr): Fitted with Internal Braking Switch. If Dynamic Braking is required an external resistor should be fitted (not supplied). 40 Ohm minimum - See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 1 Relay Contact Set, 2 Digital Outputs. RS485, CAN-BUS
Input Current - 16.4A.
Input Voltage - Single Phase 200-240Vac ±10% at 50-60Hz ±5%
EMC Filters - None.
Safety circuit: Safe Torque Off (STO) to SIL 3. Supplied fitted with links to diable this feature. Remove links and fit safety circuit if STO is required.
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 100mm.
Ventilation space at sides: 10mm.
Mounting via 4 x 5mm diameter holes at rear on 96.3mm x 118mm centres.
Full part number is - VXT-8A-1.
Download the IMO Jaguar VXT Datasheet and Manual from the link below:-