IMO Jaguar VXT Series AC Frequency Inverter for 0.75kW (1HP) 230V 3 Ph motor to 5A. Operates in V/F (default), Sensorless Flux Vector or Closed-loop Flux Vector Control (with optional Encoder feedback card) to control a standard AC Induction motor
Size 1b: 68mm Wide x 157mm Deep x 127mm High. IP20
Weight: 0.9kg.
Output Current: 5A
Overload: 150% for 60 seconds, 200% for 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking (DBr): Fitted with Internal Braking Switch. If Dynamic Braking is required an external resistor should be fitted (not supplied). 100 Ohm minimum - See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 1 Relay Contact Set, 2 Digital Outputs. RS485, CAN-BUS
Input Current : 9.7A.
Input Voltage: Single Phase 200-240Vac ±10% at 50-60Hz ±5%
EMC Filters: None (Unfiltered)
Safety circuit: Safe Torque Off (STO) to SIL 3. Supplied fitted with links to diable this feature. Remove links and fit safety circuit if STO is required.
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 100mm.
Ventilation space at sides - 10mm
Mounting via 2 x 5mm diameter holes at rear on 118mm x 56mm centres.
Full part number: VXT-5A-1. Replaces: