Control Techniques M700 series. 30/37kW. Converts 200-240Vac +/- 10% to 400V 3ph.
Onboard Ethernet, 1 x STO Input, C3, No keypad.
V/Hz, Open Loop Rotor Flux Control for enhanced performance of induction motors, Closed Loop Rotor Flux Control of induction motors, supporting a wide range of feedback devices. Open Loop Permanent Magnet Motors Control and Closed Loop Control of Permanent Magnet AC motors. AFE for high quality power regeneration.
Frame 8: 804mm high x 310mm wide x 290mm deep.
Net Weight: 52kg.
Overload: 150% x 60 seconds (Heavy Duty) or 110% x 60 seconds (Normal Duty)
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required), minimum resistance 7.5 ohms, continuous power rating, 30kW.
Keypad NOT fitted as standard. Keypad options available below.
3 x Analogue input, 2 x Analogue output, 4 x Digital input, 1 x Digital output, 3 x Bi directional digital input or output, 1 x relay, 1 x STO terminal. Onboard Ethernet Communications.
2 channel encoder input + 1 simulated encoder output. Supports EnDat 2.2, Hiperface and SSI.
Communications options include ProfiNet, EtherCAT, Profibus, DeviceNet, CANOpen plus connectivity to legacy CTNet system.
Max Continuous Input Current: 137A.
Max output Current:149A (Normal Duty), 116A (Heavy Duty).
Input Voltage: 200-240V Three Phase ±10% at 50Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Optional external EMC filter available.
Cubicle mount.
Surface mount brackets: 4 x 9mm holes, 259mm x 784mm.
Through panel mount using bracket kit (CT part number 3470-0083).
Ambient operating temperature to 40°C.
Heat dissipation at 2kHz operation is 1339W (ND) or 1026W (HD).
Ventilation: space in front: [not specified], 100mm + 60mm for emc filter above and below, 30mm at sides (between drives).
Part No: M700-08201160A10100AB100. (M700-08201160A10)
Documentation can be downloaded from the Link below:-