Bosch Rexroth EFC 5610 Series Cold Plate AC Inverter for 2.2kW (3HP) 230V 3 Ph motor to 8.4A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
**Cold Plate: Not fitted with heatsink or cooling fans. Needs to be fitted to an external Heatsink to ensure adequate cooling; see product manual for further details**
Size D: 120mm Wide x 116mm Deep (124mm Deep including front mounted Potentiometer) x 231mm High. IP20.
Weight: 1.5kg.
2.2kW, 8.4A with 150% overload for 60 seconds (High Overload)
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 65 Ohm, maximum 70 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port. STO.
Input Current: 22.3A.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
STO Included. Up to SIL3, Cat4
Heatsink mount. (Unpainted metal surface able to sink the losses through the Cold Plate)
Rated Ambient: 45°C (55°C with de-rating). Max Temperature of Cold Plate: 70°C
Heat Loss at max output: 165W total (94W Cold Plate)
Mount on to suitable heatsink using 4 x M4 Fixings. Heat Compound must be used to ensure good thermal transfer. (see product manual for full details)
Manufacturer part number is EFC5610-2K20-1P2-MDB-7P-NNNNN-L1NN or R912007352.