Bosch Rexroth EFC 5610 Series AC Inverter for 2.2kW (3HP) 230V 3 Ph motor to 8.4A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Size D: 120mm Wide x 175mm Deep x 231mm High. IP20.
Weight: 2.6kg.
2.2kW, 8.4A with 150% overload for 60 seconds (High Overload)
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): 100% duty to minimum 65 Ohm, maximum 70 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 22.3A.
Input Voltage: 200-240V Single Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Cubicle mount.
Rated 45°C Ambient.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 165W.
Mounting via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 80mm x 221mm centres.
Manufacturer part number is EFC5610-2K20-1P2-MDA-7P-NNNNN-NNNN or R912005742.
Replaces the IndraDrive Fc where the application permits.