Bosch Rexroth EFC 5610 Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor to 3.4A. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor.
Dimensions: Size B 95mm Wide x 167mm Deep x 166mm High.
Enclosure Rating: IP20.
Weight: 1.5kg.
0.75kW, 3.4A with 150% overload for 60 seconds (High Overload)
Speed Control Range: 0-400Hz.
Dynamic Braking (DBr): 100% duty to minimum 190 Ohm, maximum 200 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 10.1A.
Input Voltage: 200V-240V Single Phase ±10% at 50-60Hz ±5%.
EMC Compliance: IEC 61800-3 Second Environment C3 (Industrial).
Mounting: Cubicle mount via 35mm DIN rail or 4 x 4.5mm diameter holes at rear on 66mm x 156mm centres.
Ambient: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 70W at maximum output.
Part Number: EFC5610-0K75-1P2-MDA-7P-NNNNN-NNNN, or R912005740.
Replaces the IndraDrive Fc where the application permits.