ABB ACS480 2.2kW/3kW 230V 1ph to 3ph AC Inverter Drive, DBr, STO, C2 EMC

ABB ACS480 series AC Inverter for 2.2kW 230V 3ph motor to 9.8A at high overload or 3kW to 11.6A when fan/pump rated. Operates in standard VxF or Sensorless Vector Control and converts 230V 1ph input to 230V 3ph to control the speed of a standard AC Induction Motor or Permanent Magnet motor. 
 
Size R2: 96.8mm (W) x 205mm(H) x 208mm(D), 223mm (H) with Cable clamp. IP20
Weight: 2.2kg. 
 
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-599Hz 
Dynamic Braking (DBr): 2.2kW continuous for minimum 19.5 Ohms, maximum 47.1 Ohms external resistor (not supplied – see linked products below).  
 
Removable Keypad with USB mini-B socket for PC connection included. 
I/O module included: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for Modbus RTU (EIA-485) communications. 
Terminals for dual channel SIL3/PL e safe torque off (STO) included. 
DC bus terminals included. 
 
Input Current: 25.6A. 
Input Voltage: 200-240 Vac, +10%/-15%, 48 to 63 Hz
EMC compliance: EN 61800-3: 2004 + A1: 2012 Category C2 (Industrial or restricted Domestic) for motor cables up to 10m
 
Cubicle mount. 
Rated Ambient: 50°C
Ventilation space above: 75mm, below: 75mm, at sides: 0mm. 
Heat Loss at max output: 115W. 
Mounting via 35mm DIN rail or 4 x 5mm diameter slotted holes at rear 

Manufacturer part number is ACS480-04-12A2-1