ABB ACS355 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 13.3A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor.
Supplied with Assistant Control Panel.
Includes Solar Firmware Option (+N827)
Size R3 - 195mm Wide x 281mm Deep x 305mm high (346mm high including glands). IP66. (+B063)
Weight: 7.7kg.
Overload - 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range - 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 30 Ohm minimum, 50 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current - 21.7A.
Input Voltage - 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output - 139.5W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 85mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is - ACS355-03E-13A3-2+B063+N827 (3AUA0000157205).
Download the ABB ACS355 Manual from the link below:-