ABB ACS355 AC Frequency Inverter for 1.5kW (2HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 4.7A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor or permanent magnet synchronous motor. Including Solar Pump Firmware option 827
No Keypad included.
Dimensions: Size R1 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate).
Enclosure Rating: IP20.
Weight: 1.8kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start.
Speed Control Range: 0-600Hz.
Braking: Full load for 45 seconds every 120 seconds to 40 Ohm minimum, 200 Ohm Maximum external resistor (not supplied), see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: 11A.
Input Voltage: 200V-240V Single Phase at 50/60Hz ±5%.
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial).
Mounting: Cubicle mount onto 35mm DIN rail, or via 4 x 5mm diameter holes at rear on 50mm x 191mm centres, or 3 x 5mm diameter holes at side on 42 x 191mm centres. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40°C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm (drives can be mounted side by side).
Heat Loss: 72W at maximum output.
Part Number: ACS355-01E-04A7-2+N827, or (3AUA0000157173).
Download the ABB ACS355 Manual from the link below:-