This product is no longer in production. Direct replacement is the ACS355 - see linked products below.
ABB ACS350 AC Frequency Inverter for 1.1kW (1.5HP) 230V 3 Ph motor in VxF or Vector control to 6.7A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
R1 Size - 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.
Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 56 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Features - Basic Keypad, 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current - 16.1A.
Input Voltage - 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Heat Loss at max output - 26.4W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is - ACS350-01E-06A7-2+J404
Use this drive to slow down a 1.5kw or 2.2kW x 400V Motor. Setting its 'Base Frequency' to 29Hz means it will provide full torque output up to the 29Hz speed of the 400V motor.
Download the ABB ACS350 Manual and Installation Guide from the links below:-