ABB Drives ACS 150 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF control to 9.8A. Converts fixed frequency Three Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor.
Dimensions: R2 Size, 105mm Wide x 144mm Deep x 169mm high (plus cable clamp plate at 70mm)
Enclosure rating : IP20 case.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 30 Ohm Minimum, 70 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 14.3A, or 11A when supplied via 1.5mH choke.
Input Voltage: 200/208/220/230/240V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail or use the screw fixings for side or rear mounting. Wall mount when the top cover and gland box option is added, see the linked products below.
Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 100W at maximum output.
Mounting: Onto symmetrical DIN rail, or use the screw fixings for side or rear mounting.
Part Number: - ACS150-03E-09A8-2 (68582059)
Replaces the ACS100 that is no longer manufactured.
Download the ABB ACS150 Installation Guide and Manual from the links below:-