ABB Drives ACS 150 AC Frequency Inverter Variable Speed Drive Controller for 1.5kW (2HP) 230V 3 Ph motor in VxF control to 7.5A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
Dimensions: R2 Size 105mm Wide x 144mm Deep x 169mm high (plus cable clamp plate at 70mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 30 Ohm Minimum, 100 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters: EN61800-3 to the 2nd Environment C3 (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Can be installed with supplies protected by RCD Type A.
Input Current: 16.8A, or 12A when supplied via 1.2mH choke.
Input Voltage: 200/240V single phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail or use the screw fixings for side or rear mounting. Optional Wall mount top cover and gland box are available from the options linked below.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 90W at max output.
Part number: ACS150-01E-07A5-2 (68581982)
Replaces the ACS100 that is no longer manufactured. ACS101-2K7-1.
Download the ABB ACS150 Installation Guide and Manual from the links below:-