ABB Drives ACS 150 AC Variable Frequency Inverter Drive Controller for 0.75kW (1.0HP) 230V 3 Ph motor in VxF control to 4.7A. Converts fixed frequency Single Phase 230V input to variable frequency Three Phase 230V output to control the speed of a standard AC Induction motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
Dimensions: R1 Size 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 40 Ohm Minimum, 200 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Can be programmed from a pc via 'Flashdrop'.
EMC Filters: EN61800-3 to the 2nd Environment C3 (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Can be installed with supplies protected by RCD Type A.
Input Current: 11.4A, or 8.1A when supplied via 2.8mH choke.
Input Voltage: 200/240V single phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail or use the screw fixings for side or rear mounting. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 62W.
Part Number: ACS150-01E-04A7-2 (68581966).
Replaces the ACS100, that is no longer manufactured. (ACS101-1K1-1, ACS101-1K6-1)
Download the ABB ACS150 Installation Guide and Manual from the links below:-