WEG CFW100 Series AC Inverter for 0.18kW (0.25HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 1.6A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC induction motor.
Dimensions: Size A 55mm Wide x 129mm Deep x 100mm High.
Enclosure Rating: IP20.
Weight: 0.48kg.
Overload: 150% x 60 seconds every 10 minutes.
Speed Control Range: 0-300Hz.
Braking: None.
Features: Fixed Keypad, Standard IO consists of 4 Digital Inputs for Run and Speed control via switches for its internal Electronic Potentiometer or Pre-Set Speeds. Expansion modules are available, see linked products below. Only one module can be fitted to the CFW100.
Programmable via PC using free Superdrive G2 software (USB Communication module required - see linked products below).
Input Current: 2.4A.
Input Voltage: 200V-240V Single Phase +10% -15% at 50-60Hz (48-62Hz).
Maximum of 10 connections per hour (1 every 6 minutes).
EMC Compliance: No integrated EMC filters.
Mounting: Cubicle mount via 35mm DIN rail or optional surface mount brackets with 4 x M4 screws on 41.3mm x 113.4mm centres (not included - see linked products below).
Ambient Temperature: Rated 50°C Ambient
Ventilation space: in front: 30mm, above: 15mm, below: 40mm, at sides: 0mm.
Heat Loss: 20W at maximum output.
Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.
Part Number: CFW100A01P6S220 or 11694034
Download the WEG CFW100 Manual, Programming Guide and SoftPLC reference from the links below:-