TEC Electric 7.5kW 3ph 2 Pole High Efficiency Flange Mounting (B5) 132S Frame AC Motor for 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.
Fixed Mains Supply Output: 7.5kW (10HP) x 2910RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 291RPM to 4074RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.
Full Load Current: 13.8A at 400V.
Power Factor: 0.89 when mains connected at 50Hz.
Efficiency: 88.1% (A more efficient motor is available, please see linked products below)
Dimensions: 252mm Wide x 437mm Long x 318mm high overall.
Enclosure Rating: IP55.
Flange Mounting: on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft: 38mm dia x 80mm with 10mm wide key.
Weight: 46.2kg.
Ambient Temperature: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors for over-temperature protection included for use with an external monitoring device (see the items linked below).
Part number: TECA2-132S2-2-B5
Please note that this motor will be supplied with feet. These can be removed using a standard hex key to convert it to flange mount only
For Variable Speed use:-
Part Time Output when Inverter powered is...
17.58Nm - 7.5kW ( 10.05HP) x 4074 RPM at 70 Hz
24.61Nm - 7.5kW ( 10.05HP) x 2910 RPM at 50 Hz
24.61Nm -3.75kW ( 5.03HP) x 1455 RPM at 25 Hz
24.61Nm - 0.75kW ( 1.01HP) x 291 RPM at 5 Hz
Continuous Output when Inverter powered is...
17.58Nm - 7.5kW ( 10.05HP) x 4074 RPM at 70 Hz
24.61Nm - 7.5kW ( 10.05HP) x 2910 RPM at 50 Hz
20.92Nm - 3.19kW ( 4.27HP) x 1455 RPM at 25 Hz
12.31Nm - 0.375kW ( 0.5HP) x 291 RPM at 5 Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.