TEC TECDrive series AC Inverter for 7.5kW (10HP), 400V three phase motor in VxF or sensorless vector control to 18A. Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of a standard AC Induction Motor.
Output Current: 18A
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Size 3: 211mm Wide x 252mm Deep x 310mm High
IP Rating: IP66 with UV protection for Outdoor use (Outdoor). Suitable for indoor and outdoor use.
Weight: 7.6kg
Speed Control Range: 0-500Hz
Braking: Fitted with Brake Switch. Fit external resistor of 80 ohms if braking is required - see linked products below or use 'Which Resistor' selection tool
Fixed operator keypad with LED display
2 Digital Inputs, 2 Analogue/Digital Inputs, 1 Analogue/Digital Output, 1 Relay Contact set
RJ45 socket for Modbus RTU or CANopen communications over RS485
Input Current: 21.2A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance (C1 EMC): IEC EN61800-3:2004 Category C1 (Industrial and Domestic). Filter can be disconnected if required
Wall or Cubicle mount
Rated 40°C Ambient
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x M4 fixings at rear on 198mm x 252mm centres
Extended Warranty Available: When the TECDrive AC Inverter is used with a TEC AC motor the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.
Manufacturer part number is TEC-3-340180-3F4A this is a direct replacement for TEC-3-340180-3F4X
Made in the UK
Download the TECDrive Manual from the link below:-