TEC IE2 5.5kW Aluminium Three Phase Motor 400V 2 Pole 112L Frame B35

TEC Electric IE2 - 5.5kW 3ph 2 Pole Foot and Flange mounting (B3%) 112L Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 5.5kW (7.5HP) x 2880RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 288RPM to 4032RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 10.53A at 400V.
Power Factor is 0.88 when mains connected at 50Hz.
Efficiency is 86%

220mm Wide x 395mm Long x 292mm high overall in its IP55 enclosure.
Flange mount on 4 x 15mm holes at 215mm PCD with 180mm diameter spigot in 250mm diameter flange.
Foot mount on 12mm holes at 190mm wide x 140mm centres 70mm back from the shaft shoulder.
Shaft is 28mm dia x 60mm with 8mm wide key.
Weight is 30.2kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for over-temperature protection.
Manufacturer Part Number is 5.523TECAB35-112. Previous Part Number was - TECA2-112L-2-B35

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.