TEC Force Ventilation Fan for 112 Frame Motor, 230V 1ph

TEC Electric Force Cooling Kit (known as a 'Force Vent Kit') for use with an 112 Frame Aluminium or Cast Iron Motor.

Replaces the existing fan cowl and shaft mounted fan of an AC motor to provide IC416 form of cooling (Totally Enclosed Over-Blown), while maintaining its IP55 degree of protection.
Allows an Inverter Drive controlled AC Motor to be run continuously at low speeds, without de-rating.  Converts a standard motor to be suitable as an Extruder Motor, Conveyer Motor and many other constant torque applications.
Also allows for high speed use, when a shaft mounted fan would otherwise absorb excessive power, at increased noise level.

Supply Required: Single phase 230V x 50Hz at 0.37A
Supply Load: 65W
Speed: 2400RPM
Air Volume: 229m³/Hr at 80Pa
Noise: 67dB(A)
Enclosure Rating: IP55

Dimensions: 219mm inside diameter, 222mm o.d. x 191mm long.  Adds 100mm to the length of a standard motor.
Mounting: via 8 x slots 6mm wide x 20mm

Manufacturers Part Number: FORCEVENT-112A-230V (Also known as G-112B1, FV-112A or G-112A)

Download the data sheet and dimensions from the links below -