TEC IE2 7.5kW Aluminium Three Phase Motor 400V 2 Pole 132S Frame B5-With roller bearings

7.523TECAB5-IE2/ROLLER BRG

Order Code: 34181
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECA Three Phase IE2 Aluminium

TEC Electric - 7.5kW 3ph 2 Pole High Efficiency Flange Mounting (B5) 132S Frame AC Motor for 400V 3 phase supply.  Inverter Rated for use with a Variable Frequency Inverter Drive  or a fixed frequency mains supply at 50Hz.

Fixed mains supply output: 7.5kW (10HP) x 2910RPM at 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 291RPM to 4074RPM for 5Hz to 70Hz control, with suitable de-rating at the lower speeds.

Full Load Current - 13.8A at 400V.
Power Factor is 0.89 when mains connected at 50Hz.
Efficiency is 88.1%

252mm Wide x 437mm Long x 318mm high overall in its IP55 enclosure.
Flange mount on 15mm holes at 265mm PCD with 230mm diameter spigot in the 300mm diameter flange.
Shaft is 38mm dia x 80mm with 10mm wide key.
Roller bearings at drive end for belt driven loads.
Weight is 46.2kg.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor for 130°C over-temperature protection.
Part number is - 7.523TECAB5-IE2/Roller BRG

Please note that this motor will be supplied with feet. These can be removed using a standard hex key to convert it to flange mount only

For Variable Speed use:-
Part Time Output when Inverter powered is...
17.58Nm - 7.5kW ( 10.05HP) x 4074 RPM at 70 Hz
24.61Nm - 7.5kW ( 10.05HP) x 2910 RPM at 50 Hz
24.61Nm -3.75kW ( 5.03HP) x 1455 RPM at 25 Hz
24.61Nm - 0.75kW ( 1.01HP) x 291 RPM at 5 Hz
Continuous Output when Inverter powered is...
17.58Nm - 7.5kW ( 10.05HP) x 4074 RPM at 70 Hz
24.61Nm - 7.5kW ( 10.05HP) x 2910 RPM at 50 Hz
20.92Nm - 3.19kW ( 4.27HP) x 1455 RPM at 25 Hz
12.31Nm - 0.375kW ( 0.5HP) x 291 RPM at 5 Hz

Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.

You may also be interested in...

Photo of WEG Thermistor Protector Relay RPW-PTC

WEG Thermistor Protector Relay RPW-PTC

10075636

(RPW-PTC-E05)

Order code: 28279

25+ in stock

£42.31
£41.33
£40.34
1+
5+
10+
Photo of TEC Force Ventilation Fan for 132 Frame Motor, 230V/400V 3ph

TEC Force Ventilation Fan for 132 Frame Motor, 230V/400V 3ph

G-132B2

Order code: 31787

Delivery 3-5 days

£276.00
£262.20
£248.40
1+
5+
10+
Photo of TEC TECDrive IP20 7.5kW 400V 3ph AC Inverter Drive, DBr, C2 EMC

TEC TECDrive IP20 7.5kW 400V 3ph AC Inverter Drive, DBr, C2 EMC

TEC-3-340180-3F42

Order code: 32346

1 in stock

2+ normally 3-5 days

£473.00
1+
Photo of TEC TECDrive IP66 Indoor/Outdoor 7.5kW 400V 3ph AC Inverter Drive, DBr, C1 EMC

TEC TECDrive IP66 Indoor/Outdoor 7.5kW 400V 3ph AC Inverter Drive, DBr, C1 EMC

TEC-3-340180-3F4A

Order code: 32364

1 in stock

2+ normally 3-5 days

£718.00
1+