Vacon NXP IP21 High Performance AC Frequency Inverter for 400V 3 Ph motor in VxF, Sensorless Vector or Closed Loop Vector Control (when optional Encoder Card is fitted).
Rating - 4kW (5.5HP) to 10A at High Overload or 5.5kW (7.5HP) to 13A when Fan/Pump rated. Simple to set up for a standard AC Induction motor.
Frame 4 - 128mm Wide x 190mm Deep x 292mm High (Backplate), IP54.
weight: 5kg
Overload - 200% Output Current x 2 seconds and 150% x 60 seconds at High Overload, 110% Output Current x 60 seconds when Fan/Pump rated.
Speed Control Range - 0-320 Hz (standard).
Braking (DBr) - Dynamic Brake Switch Included. Fit 63 Ohm (minimum) external resistor (not supplied) if Dynamic Braking is required - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features - 2 Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 2 Relay Contact sets.
A Slot: A1,6DI,DO,2AI,1AO,+10Vr,+24V
B Slot: A3,2RO(NO/NC)+Therm
Parameter setting via keypad or from a PC using 'NCDrive' software (RS232C cable required - optional)
Input Current - as output current.
Input Voltage - 380-500V -10%/+10% at 50-60Hz (± 10%)
EMC Filters to EN61800-3 category C2 1st and 2nd environments (Domestic and Industrial)
Full part number is - NXP00135A5H1SSSA1A3.
Download the Vacon NXP Manual from the link below:-