Siemens V20 Series AC Frequency Inverter for 7.5kW (10HP) 400V three phase motor in VxF control to 16.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Dimensions: Size FSD 240mm Wide x 172.5mm Deep x 206.5mm High.
Enclosure: IP20.
Cooling: Two fans.
Weight: 4kg.
Overload: 150% x 60 seconds followed by 94.5% for 240 seconds (High Overload).
Speed Control Range: 0-550Hz.
Braking: To 27 Ohm minimum, external resistor (not supplied) - See the Resistor options linked below or use the 'Resistor Calculator' Link' at the bottom of this page.
Features: Integrated Keypad, 2 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, 1 Expansion Port, DC Bus Terminals, Terminals for Modbus RTU or USS over RS485 Communications.
Input Current: 20.7A.
Input Voltage: 380V to 480V Three Phase -15% +10% at 50-60Hz ±5%.
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Cubicle mount.
Ambient Temperature: 40°C.
Ventilation Space: 10mm above, 100mm below, 15mm at sides or 0mm between V20 drives.
Heat Loss: 180W at maximum output.
Mounting: Via 4 holes at rear for M5 screws on 223mm x 166mm centres.
Manufacturers Part Number: 6SL3210-5BE27-5CV0. Sometimes specified as 6SL32105BE275CV0.
Download the Siemens V20 Manual and Quick Start Guide from the links below:-