Bosch Rexroth EFC 3610 Series AC Inverter for 5.5kW (7.5HP) 400V 3 Ph motor to 12.7A at High Overload or 7.5kW (10HP) to 16.8A when Fan/Pump rated. Operates in standard VxF and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Dimensions: Size E 130mm Wide x 233mm Deep x 243mm High.
Enclosure Rating: IP20.
Weight: 3.9kg.
5.5kW, 12.7A with 150% overload for 60 seconds (High Overload) - Default Rating
7.5kW, 16.8A with 120% overload for 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking (DBr): 100% duty to minimum 70 Ohm, maximum 110 Ohm external resistor (not supplied) - see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 15.7A at High Overload, or 21A when Fan/Pump rated.
Input Voltage: 380V-480V Three Phase +10% -15% at 50-60Hz ±5%.
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if not required.
Mounting: Cubicle mount via 35mm DIN rail or 4 x 6.5mm diameter holes at rear on 106mm x 228mm centres.
Ambient: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 247W at maximum output.
Part Number: EFC3610-5K50-3P4-MDA-7P-NNNNN-NNNN, or R912005091.
Replaces an EFC3600 of equivalent rating or IndraDrive Fc where the application permits.