Bosch Rexroth EFC 3610 Series AC Inverter for 18.5kW (25HP) 400V 3 Ph motor to 39.2A at High Overload, or 22kW (30HP) to 45A when Fan/Pump rated. Operates in standard VxF and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Dimensions: Size G 165mm Wide x 241mm Deep x 313mm High.
Enclosure rating: IP20.
Weight: 8kg.
18.5kW, 39.2A with 150% overload for 60 seconds (High Overload) - Default Rating
22kW, 45A with 120% overload for 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking (DBr): 100% duty to minimum 28 Ohm, maximum 30 Ohm external resistor (not supplied), see the linked products below or use the 'Which Resistor' button on this page.
Features: Removable Keypad included, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 1 Open Collector, 1 Relay Contact set, DC Bus +/- Terminals, Terminals for RS485/Modbus communications, Mini-USB Port.
Input Current: 45.8A at High Overload, 52.7A when Fan/Pump rated.
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Filters: IEC 61800-3 Second Environment C3 (Industrial). Can be disabled via a screw on the side of the Inverter if required.
Mounting: Cubicle mount via 4 x 6.5mm diameter holes at rear on 140mm x 295mm centres.
Ambient: Rated 45°C.
Ventilation space above and below: 125mm, at sides: 0mm, in front: [not specified].
Heat Loss: 703W at maximum output.
Part Number: EFC3610-18K5-3P4-MDA-7P-NNNNN-NNNN, or R912005723.
Replaces EFC3600 of equivalent rating, or IndraDrive Fc where the application permits.