ABB ACS355 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 9.8A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor or permanent magnet synchronous motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
No Keypad included.
Dimensions: Size R2 - 105mm Wide x 165mm Deep x 169mm high (239mm high including fastenings and clamp plate).
Enclosure Rating: IP20.
Weight: 1.7kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-600Hz.
Braking: at full load for 14 seconds every 120 seconds to 30 Ohm minimum, 70 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
'Safe Torque Off' function to SIL 3.
Programmable from a PC via 'DriveWindow' or using the ABB FlashDrop tool.
Input Current: 21A, or 15A when supplied via 1mH choke.
Input Voltage: 200V to 240V Single Phase at 50/60Hz ±5%.
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Cubicle Mounting: onto symmetrical DIN rail, or via 4 x 5mm diameter holes at rear on 85mm x 191mm centres, or 3 x 5mm diameter holes at the side on 41 x 191mm centres.
Wall Mounting: in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40°C.
Ventilation Space: 75mm above and below, 0mm at sides (drives can be mounted side by side).
Heat Loss: 123.5W at maximum output.
Part Number: ACS355-01E-09A8-2 (3AUA0000058170) and is a direct replacement for the equivalent ACS350-01E-09A8-2.
Download the ABB ACS355 Manual from the link below:-