Tec 112 Frame - 5.5kW 3ph 2 Pole AC Motor for 400V 3 phase supply. Use with 400V Variable Frequency Drives or a fixed frequency mains supply at 50Hz.
Can be used over a 10:1 Speed Control range from 290RPM to 2880RPM, with suitable de-rating at the lower speeds.
Fixed mains supply output is 5.5kW (7.5HP) x 2880RPM at 400V x 50Hz 3ph.
Full Load Current - 10.53 at 400V.
Overload - 150% x 60seconds.
Power Factor is 0.88 when mains connected at 50Hz.
220mm Wide x 395mm Long x 292mm high overall in its IP55 enclosure.
Flange mount on 14mm holes at 215mm PCD with 180mm diameter spigot in 250mm diameter flange.
Shaft is 28mm dia x 60mm long.
Shaft side load is 125kg for 20,000hrs life
Weight is 30.2kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Full part number is - 5.523tecab5-112
For Variable Speed use…
Part time Output when Inverter powered is...
18.25Nm - 5.5kW (7.5HP) x 2880RPM at 50Hz
18.25Nm - 2.75kW (3.7HP) x 1440RPM at 25Hz
18.25Nm - 0.55kW (0.75HP) x 288RPM at 5Hz
Continuous Output when Inverter powered is...
18.25Nm - 5.5kW (7.5HP) x 2880RPM at 50Hz
15.5Nm - 2.3kW (3.1HP) x 1440RPM at 25Hz
9.1Nm - 0.28kW (0.37HP) x 288RPM at 5Hz
Download the tec Motor details and drawing from the link below...