TEC - 0.55kW 3ph 8 Pole Large face Mounting 90L Frame IE! AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with Variable Frequency Inverter Drives having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
Fixed Main Supply Output: 0.55kW (0.75HP) x 680RPM at 230V or 400V x 50Hz 3ph.
Inverter Drive Supply Output: 12:1 Speed Control range from 68RPM to 816RPM (5Hz to 60Hz), with suitable de-rating at the lower speeds.
Full Load Current - 3.21A at 230V, or 1.85A at 400V.
Efficiency is 66%.
Power Factor is 0.65 when mains connected at 50Hz.
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Terminal box for 1 x M25 Gland.
183mm Wide x 312mm Long x 229mm high overall in its IP55 enclosure.
Large Face/Flange mount on M8 Tapped holes at 130mm pcd with 110mm diameter register in the 160mm diameter flange
Shaft is 24mm dia x 50mm with 8mm wide key.
Weight is 15.3kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor over-temperature protection is included.
Part number is - MS 90L-8-B14B (0.5583TECAB14B) - was TECA-90S8-B14B.
For Variable Speed Use…
Part Time Output when Inverter powered is...
3.86Nm - 0.55kW (0.75HP) x 1360RPM at 100Hz
7.7Nm - 0.55kW (0.75HP) x 680RPM at 50Hz
7.7Nm - 0.28kW (0.37HP) x 340RPM at 25Hz
7.7Nm - 0.055kW (0.075HP) x 68RPM at 5Hz
Continuous Output when Inverter powered is...
5.15Nm - 0.55kW (0.75HP) x 1020RPM at 75Hz
7.7Nm - 0.55kW (0.75HP) x 680RPM at 50Hz
5.87m - 0.21kW (0.28HP) x 340RPM at 25Hz
2.55Nm - 0.018kW (0.024HP) x 68RPM at 5Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.