TEC Electric 0.25kW 3ph 2 Pole Foot and Face Mounting 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed Main Supply Output: 0.25kW (0.33HP) x 2710RPM at 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 14:1 Speed Control range from 271RPM to 3794RPM for 5Hz to 70Hz, with suitable de-rating at the lower speeds.
Full Load Current - 1.24A at 230V, or 0.71A at 400V.
Power Factor is 0.78 when mains connected at 50Hz.
Efficiency is 65% A more efficient motor is available, please see linked products below
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
130mm Wide x 215mm Long x 173mm high overall in its IP55 enclosure.
Face mount on 4 x M5 holes equispaced on 75mm PCD with 60mm diameter spigot in the 90mm diameter flange.
Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from shaft shoulder.
Shaft is 11mm dia x 23mm with 4mm wide key.
Weight is 6kg.
Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistor over-temperature protection.
Manufacturer Part number is 0.2523TECAB34.Previous Part number was - 63M2B-TECA B34
For Variable Speed use:-
Part Time Output when Inverter powered is...
0.63Nm - 0.25kW (0.33HP) x 3794RPM at 70Hz
0.88Nm - 0.25kW (0.33HP) x 2710RPM at 50Hz
0.88Nm - 0.125kW (0.165HP) x 1355RPM at 25Hz
0.88Nm - 0.025kW (0.033HP) x 271RPM at 5Hz
Continuous Output when Inverter powered is...
0.63Nm - 0.25kW (0.33HP) x 3794RPM at 70Hz
0.88Nm - 0.25kW (0.33HP) x 2710RPM at 50Hz
0.75Nm - 0.1kW (0.14HP) x 1355RPM at 25Hz
0.44Nm - 0.0125kW (0.016HP) x 271RPM at 5Hz
Extended Warranty Available: When a TEC AC Motor is used with a TECDrive AC Inverter (see linked products below) the warranty period is 2 years (from dispatch). Standard warranty is 1 year.
For the extended warranty to be valid the TEC AC Inverter and TEC Motor must be on the same order and used together when on site.