TEC Electric 0.18kW 3ph 2 Pole Foot Mounting (B3) 63 Frame AC Motor for 230V or 400V 3 phase supply. Inverter Rated for use with a Variable Frequency Inverter Drive having 1ph or 3ph input and 3ph output, or a fixed frequency mains supply at 50Hz.
**Available from stock only**
Fixed mains supply output: 0.18kW (0.25HP).
Speed: 2710RPM.
Voltage: 230V or 400V x 50Hz 3ph.
Inverter Supply Output: 12:1 Speed Control range from 271RPM to 3252RPM for 5Hz to 60Hz, with suitable de-rating at the lower speeds
Full Load Current: 0.95A at 230V, or 0.55A at 400V.
Power Factor: 0.75 when mains connected at 50Hz.
Efficiency: 63% at full load. A more efficient motor is available, please see linked products below
Set terminal box links 'three a-breast' for 230V 'Delta' connection.
Set terminal box links ‘two at one side’ for 400V 'Star' connection.
Dimensions: 130mm Wide x 215mm Long x 173mm high overall.
Enclosure Rating: IP55.
Flange mount on 4 x 10mm holes equispaced on 115mm PCD with 95mm diameter spigot in the 140mm diameter flange.
Foot mount on 7mm holes at 100mm wide x 80mm centres 40mm back from shaft shoulder.
Shaft: 11mm dia x 23mm with 4mm wide key.
Weight: 6kg.
Ambient: Rated at 40C.
Ventilation space required at rear cooling air intake.
Thermistors included for external overtemperature protection device.
Part Number: 0.1823TECAB35. Previous Part Number: 63M2A-TECA B35 (63 M2A TEC-A)
For Variable Speed use…
Part Time Output when Inverter powered is...
0.53Nm - 0.18kW (0.25HP) x 3252RPM at 60Hz
0.63Nm - 0.18kW (0.25HP) x 2710RPM at 50Hz
0.63Nm - 0.09kW (0.12HP) x 1355RPM at 25Hz
0.63Nm - 0.018kW (0.025HP) x 271RPM at 5Hz
Continuous Output when Inverter powered is...
0.53Nm - 0.18kW (0.25HP) x 3250RPM at 60Hz
0.63Nm - 0.18kW (0.25HP) x 2710RPM at 50Hz
0.54Nm - 0.077kW (0.103HP) x 1355RPM at 25Hz
0.32Nm - 0.009kW (0.012HP) x 271RPM at 5Hz
Download the Dimensions and Technical Catalogue from the links below:-