TEC IE2 200kW Cast Iron 4 Pole 3ph AC Motor 315L Double Ended Shaft B35 Foot/Flange

200.043TECCB35-IE2-DES-IB

Order Code: 23668
Photo of TEC IE2 200kW Cast Iron 4 Pole 3ph AC Motor 315L Double Ended Shaft B35 Foot/Flange
Obsolete Product
This item is now obsolete. Alternatives may be available - see linked products below.

Brand: TEC Electric Motors, Range: TECC IE2 Three Phase Cast Iron

TEC - 200kW 3ph 4 Pole High Efficiency 315L frame, Double Ended Shaft, Cast Iron AC Motor for 400V 3 phase supply.  Use with a suitable AC Frequency Inverter Drives or a fixed main supply at 50Hz.

Fixed Main Supply Output:  200kW (268HP) x 1490RPM at 400V x 50Hz 3ph.  .
Inverter Supply Output:  12:1 speed control range from 149RPM to 1750RPM for 5Hz to 60Hz  with suitable de-rating at the lower speeds and when the optional insulated bearing is added.

Full Load Current - 334.4A at 400V.
Efficiency is 94.9% at full load.
Power Factor is 0.89 when mains connected at 50Hz.

Foot mount on 28mm holes at 508mm wide x 508mm centres 216mm back from shaft shoulder.
Flange mount on 8 x 24mm holes equispaced on 600mm PCD with 550mm diameter spigot in the 660mm diameter flange.

Rated at 40C Ambient.
Ventilation space required at rear cooling air intake.
Thermistors are included for over-temperature protection.

Part number is - 200.043TECCB35-IE2-DES-IB

Download the full Technical Catalogue from the link below...

From Jan 1st 2017, three phase electric induction motors with a rated output of 0.75kW to 375kW and efficiency less than IE3 must be equipped with a variable speed drive (Inverter Drive). For exceptions, see EC Commission Regulation 640/2009.